1. High current efficiency, and fast brightening speed, good leveling.
2. Wide current density range available for various complex parts, good covering ability.
3. Wide temperature range, high cloud point of bath.
4. The deposit fine-grained, clear and transparent. The deposit is adapted to iris, blue-white, white passivation.
5. The bath performance stable, easy to maintain.

1. The CZ-5 brightener consists of CZ-5A primary brightener and CZ-5B. Auxiliary brightener, it has high bright and high leveling ability.
2. High current efficiency, good deep plating ability, excellent stability. It is a best additive for barrel plating.
3. The deposit fine-grained, clear and transparent. It is adopted iris,, blue-white, white passivation.

1. The CZ-8 brightener has fast brightening speed and high leveling ability.
2. Wide current density range, good deep plating ability, especially suited for rack and barrel plating of complex parts.
3. The deposit fine-grained, clear and transparent, it is adapted for iris, blue-white, white passivation.
4. Wide temperature range. The bath has high cloud point.
5. The bath is stable, low consumption for brightener, easy to maintain and manage, single addition, single replenishment.

1. The product consists of CZ-10A brightener and CZ-10B initiator, has white bright in color of deposit and fast brightening performance.
2. The deposit has excellent anti-iron impurity ability, available for barrel and rack plating.
3. Deposit fine-grained has good glosses easy to iris, blue-white and white passivation.
4. The bath stable, low consumption content.

1. The product consists of LV-1 bright-ener and LV-2 initiator, has high current efficiency, fast-brightening speed.
2. The bath has excellent anti-iron impurity ability, easy to rack and barrel plating.
3. The deposit fine-grained, white bright in color, easy to iris, blue-white and white passivation.
4. The bath stable, low consumption of brightener.

It is used for Sulfate Zinc plating bath. The bath has excellent throwing power and deep plating ability, deposit fine-grained bright, smooth and elegance, except is used for continuous plating of wire, is also suitable for the plating of single parts and sulfate plating for all formulas.

SZ-75 Brightener for Sulfate Zinc plating is R&D and produced by our company. Its performance is reached advanced level of international same type brightener.

1. Between the Zinc deposit and the steel wire has good adhesion strength and very low brittleness, it can reduce Zinc consumption to 2~8 % during wire drawing process.
2. The range of deposit thickness is up to 50~200 g/m² according to application requirement, suitable for continuous Zinc plating of normal, middle and high carbon steel as well as products drawing process.
3. The allows wide range of temp., the bath is easy to maintain due its low foam and high stability, especially has strong alkaline resistance.

SZ-88 additive can be used to high speed plating for curling plate, ribbon steel. It can be improved appearance and performance of Zinc deposit, mainly character:

1. The silver-white in color and smooth for appearance of Zn deposit, it has good adhesion strength with organo-coating.
2. The deposit has good toughness and ductility, the cracking-free of deposit during deep process of parts.
3. High cathode current density allow value, when the 0.3-0.5m/sec of moving speed and 30-40℃ of temperature, cathode current density can up to 70-100 A/dm², when increased moving speed and temperature up to 150A/dm².

The provided for performance of deposit mainly is due to put in additive, caused to grain structure of zinc deposit change from slice to pillar. It is demonstrate by SEM and x-ray.

1. High conductivity for plating solution, temperature rises slowly, especially for barrel plating.
2. Deposit fine-grained and showing silver-white in color, easy to iris, blue-white and white passivation.
3. Good throwing power and deep plating ability high current efficiency, fast depositing speed.
4. The bath clear and transparent as well as stable, low consumption content, easy to maintain.

　　ZN-160光亮镀锌适用于高中氰、低氰和微氰镀液，且能耐较高温度，具有如下优点：

1. 在相当大的镀液浓度及操作条件范围内均可生产出良好的产品。锌允许在7-35g/L间变化，而氰化钠可有5-70g/L之变化范围。
2. 在滚镀和挂镀之下均可产生光亮的镀层。它所能形成的光亮镀层及使用经济等是它显著的特点。
3. 镀液非常的稳定，不含醛类，使用温度可高达52℃。
4. 在低电流密度区有相当好的分散处理性能。
5. 本添加剂的氰化物镀锌槽液组份简单，维护容易，性能稳定，再生性能好。
6. 出光速度快，整平性能好。
7. 镀层外观光亮细致，铬酸盐转化膜处理性能良好，钝化后色彩鲜艳，抗蚀性能好。
8. 与其它氰化镀锌光亮剂兼容性良好, 适于高、中、低氰镀液，与美国HJ镀锌光亮剂、HT镀锌光亮剂、台湾莱德441、日本奥野KS-3200完全兼容，不需特别处理镀液即可补入，替代转缸方便。

1. The component of cyanide zinc plating containing JZ-2 additive are simple. It is easy to maintain, stable performance and regeneration ability.
2. JZ-2 also have high gloss-finishing speed, deposit is very bright, especially suitable for the thin deposit fast brightening.
3. Wide technique range of bath , it has good throwing power and deep plating after passivation, it is very colorful and good corrosion-resistance.

1. Wide bright zone. It can be plated mirror bright deposit at 0.2-2 A/dm² current density range.
2. Excellent throwing power. It can be obtained bright deposit has good mean plating ability on complex parts, especially suitable for barrel plating.
3. Suitable for low chromium passiva-tion. It may be reduced pollution of Cr+6 more than 90%.
4. It is suitable for low, middle and high bath and it may be compatible with HJ brightener for zinc plating from America , 441 from Taiwan, KS-3200 from Japan. It needs not specially treatment can be added to bath, easy to transform bath.
5. The bath without aldehyde and very stable in strong alkaline solution. Low consumption.